prism54 und WPA

Christian Ordig chr.ordig at gmx.net
Di Feb 6 12:37:50 CET 2007 

Hallo Leute,

hat es schon irgendwer hinbekommen, eine prism54 basierte WLAN-Karte 
mit WPA zu betreiben? Laut Kernel Changelog soll das ja theoretisch ab 
2.6.19 gehen. Habe derzeit 2.6.20rc6 im Einsatz.

hier noch ein paar Infos:
# dmesg
[ ... ]
[162507.804000] pccard: CardBus card inserted into slot 1
[162507.804000] PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
[162507.804000] ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[162507.804000] prism54: pci_set_mwi(pdev) succeeded
[162510.296000] eth1: resetting device...
[162510.296000] eth1: uploading firmware...
[162510.472000] eth1: firmware version: 1.0.4.3
[162510.472000] eth1: firmware upload complete
[162510.708000] eth1: interface reset complete

die Ausgabe von
# wpa_supplicant -dd -i eth1 -c wpa.conf -D wext > prism.log 2>&1

hängt an der Mail dran. der AP ist 00:13:10:15:27:B6.

hier noch die wpa.conf:

ap_scan=2                                                               
network={                                                               
    scan_ssid=1                                                     
    ssid="WATI_LAN"                                         
    psk=1234ff0815aaffbbccddeeff0815...0815aabbffccddeeff    
    key_mgmt=WPA-PSK                                                
    proto=WPA                                               
}


Irgendwelche Ideen? Oder ist der Kram im Kernel nicht wirklich 
getestet, und funktioniert einfach nicht? Worauf ja 
ioctl[SIOCSIWAUTH]: Operation not supported 
hindeuten könnte.

Gruß.

-- 
Christian Ordig
Germany
-------------- nächster Teil --------------
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - Initializing interface 'eth1' conf 'wpa.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file 'wpa.conf' -> '/home/chris/wpa.conf'
Reading configuration file '/home/chris/wpa.conf'
ap_scan=2
Line: 3 - start of a new network block
scan_ssid=1 (0x1)
ssid - hexdump_ascii(len=8):
     57 41 54 49 5f 4c 41 4e                           WATI_LAN        
PSK - hexdump(len=32): [REMOVED]
key_mgmt: 0x2
proto: 0x1
Priority group 0
   id=0 ssid='WATI_LAN'
Initializing interface (2) 'eth1'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=21 WE(source)=19 enc_capa=0x7
  capabilities: key_mgmt 0xf enc 0x7
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:09:5b:94:02:92
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
Setting scan request: 0 sec 100000 usec
Added interface eth1
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Authenticate request to 00:04:0E:17:75:4C  : REJECTED  (10)'
Wireless event: cmd=0x8b06 len=8
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Authenticate request to 00:15:0C:A0:7F:10  : ACCEPTED  (00)'
Wireless event: cmd=0x8c02 len=64
Custom wireless event: 'Associate request to 00:15:0C:A0:7F:10  : ACCEPTED  (00)'
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
Added BSSID 00:00:00:00:00:00 into blacklist
State: DISCONNECTED -> DISCONNECTED
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'WATI_LAN'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 2
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 60 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8b06 len=8
Wireless event: cmd=0x8b1a len=16
Wireless event: cmd=0x8c02 len=63
Custom wireless event: 'Received a probe from client to 00:13:10:15:27:B6  (00)'
Wireless event: cmd=0x8c02 len=70
Custom wireless event: 'Received a beacon from an unkown AP to 00:13:10:15:27:B6  (00)'
Wireless event: cmd=0x8c02 len=63
Custom wireless event: 'Received a probe from client to 00:13:10:15:27:B6  (00)'
Authentication with 00:00:00:00:00:00 timed out.
BSSID 00:00:00:00:00:00 blacklist count incremented to 2
State: ASSOCIATING -> DISCONNECTED
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - abled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'WATI_LAN'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 2
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 60 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8c02 len=63
Custom wireless event: 'Received a probe from client to 00:13:10:15:27:B6  (00)'
Wireless event: cmd=0x8c02 len=63
Custom wireless event: 'Received a probe from client to 00:13:10:15:27:B6  (00)'
Wireless event: cmd=0x8c02 len=63
Custom wireless event: 'Received a probe from client to 00:13:10:15:27:B6  (00)'
Wireless event: cmd=0x8c02 len=63
Custom wireless event: 'Received a probe from client to 00:13:10:15:27:B6  (00)'
Wireless event: cmd=0x8b06 len=8
Wireless event: cmd=0x8b1a len=16
Wireless event: cmd=0x8c02 len=70
Custom wireless event: 'Received a beacon from an unkown AP to 00:13:10:15:27:B6  (00)'
Wireless event: cmd=0x8c02 len=63
Custom wireless event: 'Received a probe from client to 00:13:10:15:27:B6  (00)'
Wireless event: cmd=0x8c02 len=63
Custom wireless event: 'Received a probe from client to 00:13:10:15:27:B6  (00)'
Wireless event: cmd=0x8c02 len=63
Custom wireless event: 'Received a probe from client to 00:13:10:15:27:B6  (00)'
Wireless event: cmd=0x8c02 len=63
Custom wireless event: 'Received a probe from client to 00:13:10:15:27:B6  (00)'
Wireless event: cmd=0x8c02 len=63
Custom wireless event: 'Received a probe from client to 00:13:10:15:27:B6  (00)'
Wireless event: cmd=0x8c02 len=63
Custom wireless event: 'Received a probe from client to 00:13:10:15:27:B6  (00)'
Wireless event: cmd=0x8c02 len=63
Custom wireless event: 'Received a probe from client to 00:13:10:15:27:B6  (00)'
Wireless event: cmd=0x8c02 len=63
Custom wireless event: 'Received a probe from client to 00:13:10:15:27:B6  (00)'
Wireless event: cmd=0x8c02 len=63
Custom wireless event: 'Received a probe from client to 00:13:10:15:27:B6  (00)'
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface eth1
State: ASSOCIATING -> DISCONNECTED
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
wpa_driver_wext_set_drop_unencrypted
wpa_driver_wext_set_countermeasures
No keys have been configured - skip key clearing
WEXT: Operstate: linkmode=0, operstate=6
Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
Cancelling scan request